Turn a regular light into a remotely controlled light with the Misopily Remote Control Light Socket Kit. This 3-pack uses E26 and E27 screw-in light sockets and is designed to provide convenient control without wiring. Screw a socket into an existing ceiling light socket, replace the bulb, and use the wall-mounted switch to operate the light. The setup changes a hard-to-reach pull-chain arrangement into a wall-mounted control without requiring an electrician.
The remote control lets you turn compatible lights on or off from anywhere you choose. The control can be useful in rooms where reaching the light is inconvenient and is suitable for homes, offices, elderly users, children, and people with limited mobility. A timer function provides selectable automatic shutoff periods of 15, 30, or 60 minutes, helping you set the light to turn off after a chosen interval.
The sockets support LED and CFL lamps within 60W and incandescent lamps within 60W. Do not exceed the maximum load. These sockets are not suitable for high power tungsten lamps, halogen lamps, or other pet heating bulbs. No driver or software is required for use. The kit is suited for walk-in closets, garages, attics, laundry rooms, basements, stairways, front doors, carports, pantry rooms, storage rooms, corridors, and patios.
The listed product dimensions are 24.79 x 12.60 x 6.91 cm, and the product weight is 290.02 g. Package dimensions are 17.02 x 12.19 x 6.86 cm, with a package weight of 199.58 g. The package contains 3 remote control light sockets as indicated by the 3-pack configuration. Check the existing socket and bulb type before installation, use compatible lamps within the stated wattage limits, and follow the load limitation when selecting a bulb.
Convert a regular light into remote-controlled lighting by screwing the E26 or E27 socket into an existing ceiling light socket without wiring
Use the remote to turn compatible lights on or off from anywhere, offering convenient control for homes offices and people with limited mobility
Choose a 15-, 30-, or 60-minute automatic shutoff timer to turn the light off remotely, helping save energy and eliminating the need to return to the switch
Install by screwing the socket into the ceiling light socket replacing the bulb and using the included wall-mounted switch without an electrician
Supports LED and CFL lamps within 60W and incandescent lamps within 60W; do not exceed the maximum load or use high power tungsten halogen or pet heating bulbs
The 3-pack is suited for closets garages attics laundry rooms basements stairways patios pantries storage rooms corridors front doors and carports
