Add motion-activated lighting control to an existing indoor light setup with the Misopily PIR Motion Sensor Light Socket. Designed for E26 and E27 screw-in light bulbs, this adapter converts an ordinary bulb into an infrared sensor light. When someone approaches, the sensor detects motion and turns the connected light on, providing automatic operation in suitable indoor areas.Two adjustment buttons provide control over how the socket operates. Use the Time button to set the duration for which the light remains on after motion is detected. Use the LUX button to set the ambient light level below which the socket will turn on. This helps prevent activation when sufficient ambient light is already present. The socket also uses infrared energy from a person as its control signal and can identify day and night automatically.The light socket is suitable for a variety of indoor locations, including garages, basements, pantry rooms, storage rooms, closets, stairs and corridors. It is intended for indoor use only. The socket supports a maximum power of 60W and a maximum voltage of 100V-240V. Check that the connected E26 or E27 bulb and the installation location match these stated limits before use.Installation requires no extra tools according to the supplied product information. Pick up motion and the connected light turns on through the sensor-controlled socket. The product weight is 2.82 ounces, and the product dimensions are 5.47 x 2.4 x 2.32 inches. The package weighs 0.18 pounds and measures 5.5 x 2.4 x 2.3 inches. Package measurements are separate from the assembled product dimensions.
Motion detection responds when someone approaches and uses infrared energy from a person as the control signal for automatic light operation in indoor areas
Use the Time button to adjust how long the connected light stays on after motion is detected for flexible control in rooms and passage areas
Use the LUX button to set the ambient light level below which the socket turns on so it does not activate when sufficient light is already present
Designed for E26 and E27 screw-in light bulbs this adapter converts an ordinary bulb into an infrared sensor light socket for indoor use
The socket identifies day and night automatically and is suitable for basements pantry rooms storage rooms closets stairs and corridors
No extra tools are needed for installation while the socket supports a maximum 60W bulb and 100V-240V maximum voltage for indoor applications
