Add motion-activated control to a compatible screw bulb with the Misopily motion sensor light socket. This PIR socket adapter connects to E26 or E27 bulbs and can turn the connected light on automatically when it senses body temperature within a 6 to 16 ft range. After motion is detected, the light delays turning off according to the selected time setting. The adapter is designed to convert an ordinary E26 or E27 screw bulb into an infrared sensor light, making it suitable for areas where automatic light control is useful.The socket provides adjustable illumination settings from 3 to 2000 lux. The time device allows the time and LUX settings to be adjusted, while the socket status and working mode can be set according to the needs of the space. This gives the user control over how the connected light responds within the sensing area. The product supports a maximum power of 60W and a maximum voltage of 110V to 240V.Use this motion sensor socket in a basement, pantry room, storage room, closet, stair area, corridor, hospital, exhibition hall or other listed application area. It is intended for use with E26 and E27 screw-on light bulbs, so check the bulb base type before installation. The product measures 5 x 2.4 x 2.4 inches and weighs 2.39 ounces. For shipping and storage reference, the package measures 5.9 x 2.4 x 2.3 inches and weighs 0.15 pounds.The motion sensor light socket comes with a 12-month hassle-free replacement commitment. If there is a problem with the order, support is available through direct contact, with a stated response time of 24 hours. The socket provides a way to add motion sensing to a compatible light bulb without replacing the bulb with a separate motion-sensor bulb, while the adjustable time and illumination settings help configure operation for the selected installation area.
The PIR motion sensor socket turns on and delays off automatically when connected to an E26 or E27 bulb and detects body temperature within a 6 to 16 ft sensing range
Adjust the time setting and illumination level from 3 to 2000 lux to configure the socket status and working mode according to the needs of the installation area
The screw bulb adapter fits E26 and E27 light bulbs and converts an ordinary compatible bulb into an infrared sensor light with a maximum power of 60W and voltage of 110V to 240V
Use the motion sensor light socket in basements pantry rooms storage rooms closets stairs corridors hospitals exhibition halls and other listed indoor areas
The product measures 5 x 2.4 x 2.4 inches and weighs 2.39 ounces while the package measures 5.9 x 2.4 x 2.3 inches and weighs 0.15 pounds
Each motion sensor light socket includes a 12-month hassle-free replacement commitment and order support with a stated response time of 24 hours for reported problems
