Shoot level lines across a full jobsite with a self-leveling rotary laser that reaches 1650 ft with the included receiver and holds 0.06 in of accuracy per 100 ft. The head self-levels within 5 degrees and offers scan angles of 0, 10, 45, 90, and 180 degrees plus rotation speeds of 0, 60, 120, 300, and 600 rpm. Four 1.2-volt C-type NiMH cells run 8 to 12 hours per charge and the impact-resistant ABS housing seals to IP54. The kit packs a hard toolcase, an aluminum tripod, a grade rod, a receiver, a remote, and laser glasses.
360-Degree Self-Leveling Head: The rotary head sweeps a red beam through a full 360 degrees self-levels within 5 degrees and holds 0.06 in of accuracy per 100 ft for slabs footings and grade work
1650-ft Range with Receiver: Paired with the included receiver the laser reads out to 1650 ft so you can carry a line across a whole jobsite and the laser glasses sharpen the beam in bright sun
Five Scan Angles Five Speeds: Pick a 0 10 45 90 or 180 degree scan angle and 0 60 120 300 or 600 rpm rotation to match ceiling grid layout foundation forms or a long exterior grade
IP54 Housing and Hard Case: Impact-resistant ABS sealed to IP54 keeps water and dust out and the kit rides in a hard toolcase with an aluminum alloy tripod that racks from 27.6 to 40.6 in
8 to 12 Hours per Charge: Four 1.2-volt C-type NiMH cells with the included charger run 8 to 12 hours between charges and a 65-ft remote switches modes without walking back to the tripod
