The Maestro LED+ dual dimmer and timer is a combination control that features a “stacked” design to control more than one light or fan from a single location. Adjust the lighting level of one light source with the dimmer and control a second light or fan with an on/off timer. Press the top switch once to have lights fade on to your favorite preset level or press twice for full on. Hold and release for a delayed fade-to-off, allowing for extra time to leave a room before the lights shut off. Use the easy-to-adjust button press programming to adjust the dimming range for improved bulb performance. Use the bottom tap switch to turn the timer on and use the rocker on the side to set the timer to the desired time-out option, anywhere from 5-60 minutes. Softly lit orange indicator lights denote time remaining before turn-off. If desired, disable indicator lights to avoid unwanted glow when the switch isn’t in use. The Maestro double dimmer and timer works with 75 watts of LEDs or 300 watts of incandescent or halogen (top load) and up to 2.5A any lighting type or fans, including DC and high efficiency fans (bottom load). Like other LED+ products, the Maestro LED+ dual dimmer and timer works with the existing wiring in your home and does not require a neutral wire. This works in single-pole applications only, where lights are controlled from one location. Includes (1) Maestro LED+ dual dimmer and timer switch; coordinating Claro wallplate not included.
Stacked dimmer and timer saves space by providing a 2-in-1 solution; adjust the light level with a click of the dimmer (top) and set a countdown timer for a separate light or fan (bottom)
Tap dimmer switch once for favorite preset light level or twice for full on; press and hold for delayed fade-to-off, allowing for extra time to leave the room before the lights go out
Dimming load works with 75W LED bulbs or 300W incandescent/halogen bulbs; on/off timer load works with all bulb types or up to 2.5A fans, including DC and high efficiency fans
Timer can be set to operate fan or light for 5-60 minutes before turning off automatically; orange indicator lights denote time remaining before turn-off
Works in single pole applications, where lights or fans are controlled from 1 location
The Maestro LED+ dual dimmer and timer switch works with the existing wiring in your home and does not require a neutral wire
Includes easy to adjust dimming range with button press programming to improve bulb performance and allow for smooth, continual dimming
UL listed to control mixed loads of bulbs (different types of bulbs on the same circuit)
Ideal replacement for stacked switches that aren't rated for LEDs, commonly found in kitchens and bathrooms; save space and avoid cutting additional holes in the wall to install two separate controls
