The Lukvuzo M10 plus nut rivet nut installation tool set provides a selection of components for installing threaded insert nuts in suitable metal plates and pipes. The multi-grip hand rivet nut tool is made from steel, and its surface is heat-treated to help prevent corrosion while increasing the durability and strength of the tool. The set is identified as a 4-piece plus nut tool configuration with stainless designation and includes an assortment for installation work.
Included parts are plus nuts, a step drill, a hexagon bit, a hex wrench and a riveter assembly. These components support installation tasks involving threaded insert nuts and plus nuts. The set is suitable for connecting most metal plates and pipes and can be used when riveting industrial electrical products. Listed application examples include vehicles, ladders, furniture, home décor, elevators, cars, bicycles, boats, switches and instruments.
An instruction sheet is provided with the rivet nuts installation tool in the case. Refer to the instructions during setup and use to help proceed smoothly and save time. Follow the stated operating limits when preparing the workpiece. Drilling speed must remain under 400 r/min, and the metal plate thickness for the drill must be within 2mm. When using an electric tool or manual tool, do not over torque the assembly because the inner shaft may be broken.
The listed product dimensions are 5.91 x 3.15 x 1.18 inches, and the product weight is 13.12 ounces. These measurements describe the product separately from the package. Package dimensions are 5.3 x 3 x 1.1 inches, and package weight is 0.73 pounds. The dimensions and weights are provided as listed for the product and its package. This set is intended for the supplied M10 plus nut installation configuration and includes the listed tools and accessories without additional specifications beyond those stated.
The Lukvuzo multi-grip rivet nut tool is made from steel with a heat-treated surface designed to help prevent corrosion and increase tool durability and strength
The upgraded installation set includes plus nuts, a step drill, hexagon bit, hex wrench and riveter assembly for rivet nut installation tasks
This set is suitable for connecting most metal plates and pipes and for riveting industrial electrical products including vehicles, ladders, furniture and home décor
Use the included instruction sheet for guidance with the rivet nuts installation tool to help proceed smoothly and save time during the installation process
Keep drilling speed under 400 r/min and use the drill only with metal plates within 2mm thickness; do not over torque because the inner shaft may break
The listed product dimensions are 5.91 x 3.15 x 1.18 inches and product weight is 13.12 ounces, while package dimensions are 5.3 x 3 x 1.1 inches
