Use Klean-Strip® Kwik-Strip™ Fast Paint and Varnish Stripper and Remover works in 15 minutes to strip multiple layers fast. Use on wood, metal and masonry. DIRECTIONS FOR USE: 1) Shake well. 2) Pour into a metal container and apply a thick coat with a paint brush to a small area (up to 3 ft. x 3 ft.). Brush in one direction only. Leave the area and let the stripper do the work. 3) After 15 minutes, test scrape a small area to see if finish is ready for removal. Remove loosened finish by gently scraping in direction of wood grain with a plastic stripping tool. A toothbrush, toothpick or stripping brush will help remove old finish buried in recesses. Multiple coats or stubborn finishes may require repeat application. 4) Use a clean abrasive pad dipped in After Wash or Odorless Mineral Spirits to loosen remaining finish and remove any residue. Surface should be completely clean and dry before refinishing. Keep out of reach of children.
Strips multiple layers fast
For use on wood, metal and masonry
Brushable – clings to surfaces
Will not raise wood grain
Read entire label prior to use or storage
For Pro’s and DIY’ers, Klean-Strip® is the leading brand of solvents, thinners, removers, and cleaners
Dependable for reliable results