JonyJib JONYJIB2-15 15 ft. Camera Jib Arm with Rear Control Center and 100 mm Mounting Hub

The JonyJib2 15 is a 4 section jib giving 15 feet of camera height and 9-10 feet of reach. It includes 4 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub and rear control and weight mounting center. It also comes with an articulating mounting bracket with 1/4-" screw for your LCD monitor. This jib has 2 selectable fulcrum points. 30 lb. camera capacity ( 100mm bowl style tripod, dolly and counterweights not included)The JonyJib2 is expandable from 9' ( 2 sections) to 18' ( 5 sections) in 3' increments. Each extension tube is 4' long giving a 1' overlap between sections. Since each section slides out, pulled from the previous sections, you may store unused sections in the tail as ballast weight. This lightens your counterweight demand. You can buy as few, or as many, sections as you need. Then purchase more sections when you need them. The main arm and extension sections are fabricated aluminum extrusions while the pivot point, camera platform and rear control center are steel. All are powder coated with a durable cobalt black finish. The JonyJib2 may also be fitted with many optional accessories from motorized pan and tilt units, zoom/focus controls, LCD monitors, cable looms and power accessories. Features Unused sections may be stored in tail as ballast Durable cobalt black powder-coated finish Control center may be over-slung or under-slung Foam padding on underside of arm for bump protection Specifications Construction: Powder-Coated Aluminum Alloy Height Range: 0-15.0'/0-4.57m Fold Down: 48-"/121.92cm Size: 15 ft