Jony Jib JONYJIB2-12 12 ft. Camera Jib Arm with Rear Control Center and 100 mm Mounting Hub

The JonyJib2 12 is a 3 section jib giving 12 feet of camera height. It includes 3 mast sections, camera platform, leveling cable, pivot bracket, 100mm mounting hub, rear control and weight mounting center. This jib has 2 selectable fulcrum points. The JonyJib2 is expandable from 9 ' ( 2 sections) to 18 ' ( 5 sections) in 3 ' increments. Each extension tube is 4 ' long giving a 1 ' overlap between sections. Since each section slides out, pulled from the previous sections, you may store unused sections in the tail as ballast weight. This lightens your counterweight demand. You can buy as few, or as many, sections as you need. The main arm and extension sections are fabricated aluminum extrusions while the pivot point, camera platform and rear control center are steel. All are powder coated with a durable cobalt black textured finish. The JonyJib2 may also be fitted with many optional accessories from motorized pan and tilt units, zoom/focus controls, LCD monitors, cable looms and power accessories. Order the optional JonyJib Wiring Loom and all jib and camera cables are contained in a braided jacket making setup and teardown much quicker than using individual wires. The pivot point is pre-drilled to mount an optional Anton Bauer Gold Mount plate kit that, with your batteries, can feed an optional passive 12 volt power distribution box at the tail. The optional distribution box can feed 12 volts power to the motorized pan and tilt head, zoom and focus controls, the monitor and the camera. The pivot point is also pre-drilled to mount the included LCD monitor mounting bracket or an 'optional ' monitor platform for 5-9-" CRT monitors. The adjustable camera platform self-leveling cable is also anchored at the pivot point. The camera platform is designed to over-sling or under-sling an optional motorized pan and tilt head without any changes. Just attach it either way ' and there's 360 degree pan and tilt clearance. For a turnkey solution, add a heavy duty 100mm bowl style