The Mini Duct Hunter is a traceable duct rodder that offers a non-invasive solution for locating and mapping underground ducts and pipes measuring between 1/2 and 1-1/2 In. in diameter. The detectable fiberglass rod incorporates a 22 AWG copper trace wire that can be located at 10 Ft. depths. Accessory kit is included.
For use in conduit with an inside diameter between 1/2 and 1-1/2 inch
Includes 300 Ft. of 3/16 In. diameter traceable fiberglass rod
Includes a canvas pouch with (1) flexible leader with ball tip, (1) end ferrule, (1) splice ferrule, (2) emery cloths, (2) two-component epoxy adhesive sets and (1) piece of heat shrink tubing
Bend radius of 2.5 inches