8 position, 8 contact RJ-45 modular plug for CAT6, 100 Ohm balanced twisted pair 250 MHz cables
Three prong contact design for use with solid or stranded 23-24 AWG insulated copper conductors up to 0.041 inch in diameter accepts outer jacket cable diameters of up to 0.280 inch
Flush cut of excess conductors minimizes inadvertent contact outside of the plug
Eliminates wasted connectors due to incorrect assembly
Crimp with IDEAL FT-45 30-495 crimp tool
Single piece design 50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles
Conductor order can then be verified before the connector is crimped this eliminates wasted connectors, saves time in assembly, and reduces the chances of finding an error during a wiremap test of the cable
The cable can be pushed or pulled into the connector to ensure that the twisted pairs are within 1/4 inch of the pin contacts and that the jacket is seated beyond the primary strain relief for a secure connection
Conductors fully seated above pin contact, no opens due to a short/misaligned conductor