The Gorilla Garage Floor Coating (12 pc) Kit is an incredibly durable, two-part, 100% solids epoxy (not water based) system that delivers ultimate protection in just one coat. This high-performance, self-leveling formula provides exceptional resistance to chemicals, abrasions, salt, oil, gas, and hot tire pickup. Perfect for garages, basements, workshops, warehouses, retail stores, concrete floors and more. The high-gloss black finish gives your concrete floor a clean, showroom-quality look. With up to 550 sq. ft. of coverage, the all-in-one kit includes all the essential supplies you need for a successful DIY project: concrete etch for proper surface prep, mixing buckets, stir sticks, roller covers, epoxy resin 128 fl. oz., epoxy hardener 128 fl. oz., decorative black metallic blend flakes 1.1lb, and clear, step-by-step instructions with helpful how-to video guides. *Actual coverage may vary based on the condition and porosity of the concrete. ± Timeframes are dependent upon weather conditions and temperature. Cooler temperatures will increase dry time. DO NOT apply when temperatures are below 50° F. Covers up to 550 sq. ft.: Includes two gallons of premium material – enough for a thick, long-lasting coat on a standard 2.5-car garage floor.
INCREDIBLY DURABLE, 2-PART 100% SOLIDS EPOXY: It won’t peel from hot tire contact and is resistant to salt, oil, gas, & other harsh chemicals.
COVERS UP TO 550 SQUARE FT: Each kit includes all the essential supplies to coat a 2.5-car garage.
DIY READY—PROJECT RESOURCES & SUPPORT: A step-by-step instructions guide, how-to video tutorials, and an on-demand virtual assistant to guide you through every step.
DRIVE ON AFTER 1 DAY: Quick curing epoxy resin and hardener allows you to use your space 24 hours after application.
ULTIMATE PROTECTION IN ONE COAT: 2-part 100% solids epoxy delivers, incredibly durable, exceptional resistance to chemicals, abrasions, salt, oil, gas, and hot tire peel-up that is ideal for garages, basements, workshops, & more.
HIGH GLOSS FINISH: Achieve a showroom-quality finish that is crack resistant, peel proof, low VOC, while enhancing the appearance and performance.
12 PIECE DIY KIT: Epoxy resin, epoxy hardener, decorative black metallic blend flakes, concrete etch for proper surface prep, mixing buckets, stir sticks, roller covers, decorative and easy-to-follow pictured with printed instructions as well as how-to video guides for a seamless application.
PREPARATION: Floor Preparation is key to success for any floor project-Wash the floor with soap and water & use a degreaser, if needed, for oily spots.
