The 82305 is a 12 piece punch and chisel set by GEARWRENCH. The set includes 4 cold chisels, a center punch, 4 pin punches, a long taper punch, and 2 starter punches. The cold chisels are used for cutting rivets, bolts, and nuts. The pin punches are for final removal to drive out pins and rivets. Use the center punch to mark center lines and pilot drill locations. Install and remove pins and shafts with the long taper punch. Use the starter punch for both starting and installing pins and rivets.
Chisel for cutting rivets, bolts, and nuts
Pin punch for final removal to drive out pins and rivets
Center punch for marking center lines and pilot drill locations
Long taper punch to install and remove pins and shafts and to align holes
Starter punch for both starting and installing pins and rivets