Clear leaves, pine needles, straw, and sticks from a large yard in fewer passes with this 60 in tow-behind landscape rake, which hooks to a tractor or ATV and lets the equipment do the pulling. Twenty-one spring steel coil tines flex over bumps and roots without bending, lifting surface debris while leaving the grass and soil mostly intact, and they can scratch the topsoil lightly to prep a seedbed. The all-steel Q235 frame carries a rust-proof powder coating that holds up season after season outdoors. A 1.97 in connector attaches to 48 in or 60 in toolbars and 3-point suspension systems, so it fits a range of tractors and ATV setups, and simple bolt-together assembly gets it ready fast. The C-shaped fork tines pop out for replacement with basic tools when one wears. Note the rake collects debris on the ground and is cleared by hand, so it has no automatic dump. A practical pickup for rural yards, acreage, and post-storm cleanup.
60 in Width Clears Yards Fast: A wide 60 in working width lets a tractor or ATV pull the rake over large yards and acreage, gathering leaves and debris in fewer passes
21 Spring Steel Coil Tines: Twenty-one spring steel coil tines flex over bumps and roots without bending, lifting pine needles, leaves, and sticks while leaving grass intact
Fits 48 in and 60 in Toolbars: A 1.97 in connector attaches to 48 in or 60 in toolbars and 3-point suspension systems, fitting a range of tractor and ATV setups
Q235 Steel With Rust-Proof Coat: An all-steel Q235 frame with a rust-proof powder-coated finish stands up to repeated towing and outdoor use season after season
Bolt-Together With Swap-Out Tines: Simple bolt assembly gets it ready fast, and the C-shaped fork tines pop out for replacement with basic tools when one wears
Specification: Type: Tow Behind Landscape Rake and Dethatcher; Working Width: 60 in / 1524 mm; Tines: 21 Spring Steel Coil, C-Shaped Fork; Tine Size: 9.5 x 11.4 in / 240 x 290 mm; Material: Q235 Steel; Finish: Rust-Proof Powder-Coated; Connector: 1.97 in / 50 mm; Attaches To: 48 in or 60 in Toolbars, 3-Point Suspension Systems; Assembly: Bolt-Together; Overall Size: 60 x 17.7 x 16.1 in / 1524 x 450 x 410 mm; Net Weight: 66.1 lb / 30 kg
