FireXNull Self-Activating Fire Suppression Sticker design for small electrical enclosure
Heat-activated fire suppression sticker for supplemental early-stage protection inside compatible enclosed electrical and electronic equipment
FXN-S20 model selection reference: 0.7 cubic feet (20 liters); confirm suitability for the enclosure configuration, ventilation and mounting conditions
Heat-activated at 248 degrees F plus or minus 9 degrees F (120 degrees C plus or minus 5 degrees C), with no batteries, sensors or external power required
Includes one adhesive-backed FXN-S20 sticker for installation on a clean, dry interior mounting surface
Position as directed on the upper interior surface above likely ignition sources, with full adhesion and unobstructed exposure to rising heat
Turn off power and verify equipment is de-energized before installation; follow the product instructions and applicable electrical safety procedures
For enclosures with significant air leakage, vents or active forced cooling, request application review before selecting the product
Record installation and replacement dates; replace after activation or damage and within five years under the specified conditions
Single-use supplemental suppression for enclosed applications; does not replace required electrical protection, fire detection or fire-safety systems