The Design House 784868 Scroll Entry Door Lever accepts a key on one side of the lock but is operated by a turn-button knob on the other side. Finished in polished brass and designed for left or right hand doors, this handle fits the two most common backsets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry knobs are often used on front doors and back doors. Use this handle on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product is ANSI Grade-3 certified, which means this handle is rated for residential security. The Design House 784868 Scroll Entry Door Lever comes with a 5-year limited mechanical and finish warranty to protect against defects in material and workmanship.
For left or right hand doors; 2-Way Adjustable
ANSI Grade-3 Certified
Adjusts for 2-3/4-in and 2-3/8-in backsets; Fits 1-3/8-in and 1-3/4-in thick doors
Entry; Operated by a key on the exterior and interior turn-button
5-Year limited mechanical/5-Year limited finish warranty
