The Design House 741058 Scroll Universal Latch Entry door Lever and handleaccepts a key on one side of the lock but is operatedby a turn-button knob on the other side. Finished in Satin nickel and designed for left or right hand doors, this knob Fits the two most common back sets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry levers are often used on front doors and back doors. Use this lever on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch drive-in latch, 2-1/4-inch radius corner face plate, square corner face plate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product is ANSI grade-3 certified, which means this knob is rated for residential security. The Design House 741058 Scroll Universal Latch Entry door Lever and handlecomes with a 5-year limited mechanical and finish warranty to protect against defects in material and workmanship.
Locks and unlocks with a key on one side and twist knob on the other
Adjusts for 2-3/4-inch and 2-3/8-inch back sets
Fits standard 1-3/8-inch and 1-3/4-inch thick doors
ANSI grade 3
5-Year limited mechanical/5-Year limited finish warranty