The Design House 755397 Ironwood 2-Way Latch Entry Door Handle accepts a key on one side of the lock but is operated by a turn-button knob on the other side. This handle is finished in satin nickel, designed for left or right hand doors and fits the two most common backsets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry handles are often used on front doors and back doors. Use this handle on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product is ANSI Grade-3 certified, which means this handle is rated for residential security. This product comes with a 5-year mechanical and 5-year limited finish warranty
Finished in satin nickel and designed for left or right hand doors
ANSI Grade-3 Certified for residential security
Fits 2-3/4-inch and 2-3/8-inch backsets; Fits 1-3/8-inch and 1-3/4-inch thick doors
Entry lock is operated by a key on the exterior and is by a turn-button knob on the interior
5-Year limited mechanical/5-Year limited finish warranty
