The Design House 741041 Scroll Universal Latch Entry Door Lever and Handle accepts a key on one side of the lock but is operated by a turn-button on the other side. Finished in polished brass and designed for left or right hand doors, this knob fits the two most common backsets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry levers are often used on front doors and back doors. Use this knob on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a drive-in latch, 1 inch x 2-1/4-inch radius corner face plate, and square corner face plate. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product is ANSI Grade-3 certified, which means this knob is rated for residential security. The Design House 741041 Scroll Universal Latch Entry Door Lever and Handle comes with a 5-year limited mechanical and finish warranty to protect against defects in material and workmanship.
Finished in polished brass and is designed for left or right hand doors
ANSI Grade-3 Certified for residential security
Fits 2-3/4-inch and 2-3/8-inch backsets; Fits 1-3/8-inch and 1-3/4-inch thick doors
Entry Lock; operated by a key on the exterior and is by a turn-button knob on the interior
5-Year limited mechanical/5-Year limited finish warranty
