The Design House 740332 Scroll 2-Way Latch Entry door handleaccepts a key on one side of the lock but is operatedby a turn-button lever on the interior side. Finished in Satin nickel and designed for left or right hand doors, this handleFits the two most common back sets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry handles are often used on front doors and back doors. Use this handleon standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product is ANSI grade-3 certified, which means this knob is rated for residential security. The Design House 740332 Scroll 2-Way Latch Entry Wave door handlecomes with a 5-year limited mechanical and finish warranty to protect against defects in material and workmanship.
For left or right hand doors; 2-Way Adjustable
ANSI grade-3 Certified
Adjusts for 2-3/4-in and 2-3/8-in back sets; fits 1-3/8-in and 1-3/4-in thick doors
Single Cylinder; operatedby a key on the exterior and interior twist knob
5-Year limited mechanical/5-Year limited finish warranty
