The Design House 750711 Scroll Entry door Lever accepts a key on one side of the lock but is operatedby a turn-button knob on the other side. Finished in oil rubbed bronze and designed for left or right hand doors, this handleFits the two most common back sets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry knobs are often used on front doors and back doors. Use this handleon standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product is ANSI grade-3 certified, which means this handleis rated for residential security. The Design House 750711 Scroll Entry door Lever comes with a 5-year limited mechanical and finish warranty to protect against defects in material and workmanship.
Oil rubbed bronze Finish
Entry combo includes deadbolt for added security
Operated by a key on the exterior and interior turn-button
Fits 2-3/4-inch and 2-3/8-inch back sets; fits 1-3/8-inch and 1-3/4-inch thick doors
5-Year limited mechanical warranty and a 5-Year finish warranty
