DEWALT Aluminum Rolling Table Saw Stand
Item #134805 |
Model #DW7440RS
Lightweight design weighs only 33lbs., 20% lighter than other competitive mobile stands
Heavy-duty kickstand allows the stand to balance upright for mobility and storage
Quick connect stand brackets attach to saw for easy detachment from stand for loading and unloading
Wide stand base and offset rear legs provide stability and support for material feed control
Folding legs with quick release levers collapse under the stand, minimizing overall size for transport
Retractable soft grip handle slides out allowing the user to pull the saw behind him comfortably with weight near the ground
Heavy-duty aluminum construction withstands loads up to 200-lbs
Table top height provides the user ideal table top positioning for a wide variety of table saw applications
General | |||
|---|---|---|---|
Type | Table | Material | Aluminum |
Dimensions | |||
|---|---|---|---|
Assembled Weight (lbs.) | 33 | Weight Capacity (lbs.) | 200 |
Height (Inches) | 34 | Width (Inches) | 36 |
Length (Inches) | 9 | ||
Features | |||
|---|---|---|---|
Adjustable | No | Rolling | Yes |
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | No | ||
Warranty | |||
|---|---|---|---|
Warranty | 1-year limited | ||
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 24102000 | ||
Check out the Best Selling Saw Stands on Lowes.com
Ratings may include incentivized customer reviews.
What Customers Are Saying
The table saw stand is generally considered sturdy, durable, and easy to set up and move. Users praise its stability and ability to support the weight of the table saw. However, some customers have encountered compatibility issues when trying to mount their specific table saw models, requiring additional modifications. A few users also reported issues with the quality of the plastic wheel hubs. Overall, the stand is viewed as a valuable accessory that enhances the functionality and mobility of the table saw, though users should carefully consider the compatibility with their specific model.
Customer review summary generated by AI, including incentivized reviews.Trouble in QC
Needed rolling cart for my DWE7485 table saw. Looked at several and decided on this one. One thing i found out is that you need to read all reviews before deciding on an item. After the fact of reading they had sent the wrong bolt size to mate the table saw and cart, QC must be proud, i decided to put the American touch on this project. The metric hole threads were very close to 5/16 18 thread and so it became my revolt to (probably) void the warranty. Anyway American know how and ingenuity ...
From dewalt.com
Manufacturing lacks quality control.
The manufacturer / retailer provided this stand as a gift for buying the table saw. (Contrast: Some competitors bundle these items for the same price). The mounting brackets had holes which were not properly drilled to allow insertion of the provided, four hex bolts. I was forced to make a trip to the hardware store and buy four bolts to fit the holes! The stand's underside is missing a rubber piece (one of two) intended to stop movement of the handle. The stand has supported the weight of the t...
Verified Purchaser
Solid accessory
I had to wait a little bit for it to come to the store because it's so popular but I think that's for a reason. The Stand seems very sturdy and while I just got it I have no complaints, with the exception of the instructions which could use some improvement. With the 7485 saw, It brings it to a very comfortable height, something off of Goldilocks. Not too high not too low, should be comfortable for most people of average stature to work with, but perhaps a bit low or high for some. I'm about 6 f...
Verified Purchaser
Great stand & saw, but needs a mounting adaptor
The DCS7485B is a great saw and is even better when paired with a great stand like the DW7440RS (Type 2), but the mounting of the saw on the stand is not directly compatible with each other. I have seen several videos of people modifying the saw or the stand to make them bolt up together, but after paying good money for a saw and stand, i didn't want to start drilling into it. Instead I decided to mount the saw to a sheet of 3/4" plywood using square u-bolts with clear tubing over them to get a ...
From dewalt.com
Product is great instructions can improve
Great product but the instructions are really hard to follow
Verified Purchaser
Nice stand, assembly not the greatest.
Looked good in photos, but assembly diagrams and instructions were not great. Had to sand down axles to get wheels to fit, holes for kickstand didn’t line up well.
Verified Purchaser
Your feedback is valuable as we take into consideration every piece of feedback that we come across. We have documented your comments and sent them t...
specified height of 34 inches isnt even close
Like the title states the stand is no where close to 34 inches, from floor to top of table saw mounting brackets is just under 23 inches. So if youre planning on buying it because you read 34 inches then measure your table saw and think thats a good height, think again
Verified Purchaser
Dear Valued Lowe's Customer, to better answer your question, please contact the Lowe's customer service department at 800-445-6937 call any d...
Awesome Stand
I do not understand what is all the fuzz about the table saw not fitting the stand... I have a Dewalt 8 1/4 inch table saw DWE7485 and I just got this stand... and I did not have any problems whatsoever fitting the saw on the stand. The saw has below each rubber foot a threaded hole... you do not have to take the rubber foot out or drill new holes... the bolt fits fine on these threaded holes... I just put in a pressure washer and a normal washer on each bolt... and I just bolted the racks on th...
From dewalt.com
A good saw stand from Dewalt...
This rolling stand is designed for the previous generation Dewalt saws that have a full plastic casing or shroud. The newer Dewalt saws have an open tubular frame design with relocated mounting holes. If you are buying this stand for the newer Dewalt saws, you have to be aware of the following issues: 1. The supplied bolts for mounting the saw are 1/4" too short, either you have to buy new bolts or not use the supplied washers 2. The rolling stand is really designed for the older Dewalt saws. T...
Works great
Worked as it should and very sturdy. I recommend.
Verified Purchaser
16 Questions
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
Hello. Your feedback is valuable as we take into consideration every piece of feedback that we come across. We have documented your comments and sen...