Crescent 5-3/8-in 24 -Tooth Rough Finish Carbide Framing circular saw blade Individual

Great little blade

I used the framing blade today while I built a lean to roof off the back of my shed. The blade is great for framing. I made roughly 40 cuts with; it seamed as sharp at the end of the day as it was in beginning. I will update the review once I used the blade some more.

Two thumbs up for this blade

This is great circular blade form Crescent makes nice clean cuts, easy to set on your power tools, nice quality blade, cut through boards and frames 2x4 with out a problem

Good blade.

Good saw blade. Used for a small project on a job site with a 12v Dewlt circular saw. I usually use the 18 tooth blade that came with the saw, which is already a great blade. The only real difference i noticed was it took a little bit longer to cut 2x4, but thats due to the higher tooth count. Cuts were clean, the kerf was narrow. I havent used this brand before, but i couldnt find anything wrong with it. Comes with adapters for different arbor sizes.

Solid wood cutting blade for smaller trim saws!

Solid wood cutting blade for smaller portable trim saws. The teeth are carbide that they claim will last 8 times longer (not sure what they are comparing to, though). The "Active Shield" blade coating apparently allows the blade to spin through the wood with less resistance, such that the batteries will last longer (70% more cuts) than non-coated blades - this is a really neat idea! There is an "anti-kickback" tooth design that resists the typical kickback that occurs when the blade inadverte...