Community Community Pro Loudspeakers CMTY-D4LP 4.5-in. Low Profile Ceiling Speakers- Pair

D4LP is the D4 coaxial design in a low profile back can for use when clearances above the ceiling are minimal. The D4 has a wider dispersion than the larger models. The high performance D4 is a true coaxial loudspeaker with a real compression driver concentrically arranged so that the upper frequencies emerge through the center of the low-frequency drivers magnetic structure and cone via a precisely tapered Tru-Phase high-frequency waveguide. This special construction provides consistent, wide dispersion up to 16 kHz, all but eliminating high-frequency narrowing. Further pattern improvement is achieved by precisely mounting the low frequency driver ( and its concentric HF driver) centered in the baffle, as contrasted to the offset designs used by others. The D SERIES suggestion powerful magnetic structures and efficient coils to ensure high output, which results in more headroom per power amplifier. Each D SERIES ceiling model includes everything needed for standard installations, and has a built-in autoformer allowing it to be used in 8-ohm or 70V/100V applications. The D SERIES ceiling loudspeakers are ETL listed and all models have been tested by ETL to comply with UL1480, UL2043 and CSA60065. Features. 4.5-in. Low Profile Ceiling Speakers - Pair. Superb intelligibility with reduced distortion, uniform voicing. Easy installation with Drop-Stop and Twist-Assist features. Carbon Ring Cone Technology and Tru-Phase waveguide. Dimensions : 3.6-" x 9.8-". Nominal Beamwidth : 140 degrees Conical. Finish: Corrosion-resistant zinc plated steel can, white paintable ABS baffle, white powder-coated steel grille. 70V/100V Autoformer: 30W, 15W, 7.5W, 3.75. Continuous Max Output: 110 dB. Transducers: LF - 1 x 4.5-" HF - 1 x.75-" exit compression driver. Power Handling: 60W continuous 8 ohms. Sensitivity : 92 dB. Operating Range: 90 Hz - 18.5 kHz