The Campbell Hausfeld get stuff done angle grinder (XT251000) boasts the power to handle grinding, porting, smoothing, polishing and debarring while making it easy to reach tight spaces. With a 20,000 free speed RPM and a 0.2 HP motor, the XT251000 moves material quickly and efficiently. An easy valve adjustment located on the side of the housing regulates air flow for whatever output you need to get stuff done! the 1/4 In. collet makes this angle die grinder compatible with most standard bits. This die grinder boasts a lightweight composite design (1.1 lbs.), and a rubberized, comfort grip for a user friendly experience. Average air consumption of 2.8 CFM at 90 PSI. Maximum pressure of 90 PSI. Air inlet size of 1/4 In. NPT (F). Minimum hose size of 3/8 In.. an air compressor with a tank gallon capacity of 20 gallons or larger is recommended. Get stuff done faster and easier with Campbell Hausfeld – the air power expert.
The angle die grinder (XT251000) boasts a 20, 000 free speed RPM and a 0.2 HP motor to move material quickly and efficiently
The angled design makes it easy to tackle grinding, porting, smoothing, polishing and debarring, even in hard to reach areas
An easy valve adjustment located on the side of the housing regulates air flow for whatever output you need to get stuff done
This die grinder boasts a lightweight composite design (1.1 lbs.), and a rubberized, comfort grip for a user friendly experience
Average air consumption of 2.8 CFM at 90 PSI. max PSI of 90. air inlet size of 1/4 In. NPT (F). minimum hose size of 3/8 In.. get stuff done faster and easier with Campbell Hausfeld the air power expert
