The CYIKE PR-20 Tree Pruner Rope Replacement Kit provides a replacement rope for compatible manual pole saw and tree pruner systems. The rope measures 20 feet in length and 5/16 inch in diameter, and the kit includes a wooden handle. Because compatibility depends on the required rope size and system, confirm that the 20 foot length and 5/16 inch diameter match your equipment before purchasing or beginning installation. The rope fits most compatible tree pruner systems, but the supplied facts do not identify every compatible model, so checking the existing system and its rope specifications is important.
The rope is made with a braided polyester core and has a listed maximum tensile strength of 660 pounds. For installation, thread the rope end over the pulley and tie it to the eyebolt on the adapter. Continue by threading the rope over an upper pulley, then under the lower pulley on the adapter, and tie the rope end to an upper pulley. Follow the pulley path and tie points described for the compatible system during installation. The wooden handle is included with the replacement rope as stated in the product information.
The listed product dimensions are 1 x 1 x 1 inches. These are separate from the package dimensions, which measure 7.87 x 6.30 x 2.10 inches. The listed product weight is 0.34 pounds, and the listed package weight is also 0.34 pounds. This information identifies the rope length, diameter, construction, tensile strength, handle, installation routing, compatibility guidance and package details needed to compare the replacement with your current tree pruner setup. Customer service is identified in the product information as available to support customer satisfaction.
CYIKE PR-20 replacement rope measures 20 feet long and has a 5/16 inch diameter for use with compatible manual pole saw and tree pruner systems
The rope fits most compatible tree pruner systems and includes a wooden handle, so confirm the required rope size before purchasing or installing
Braided polyester core construction provides a listed maximum tensile strength of 660 pounds for this tree pruner rope replacement
For installation, thread the rope over the pulley, tie it to the adapter eyebolt, route it over the upper pulley and under the lower adapter pulley, then tie the end to an upper pulley
The listed product dimensions are 1 x 1 x 1 inches, while the package dimensions are 7.87 x 6.30 x 2.10 inches for shipping and storage
The rope weighs 0.34 pounds, the package also weighs 0.34 pounds, and customer service is identified in the product information as available to support customer satisfaction
