CRAFTSMAN Universal Swivel Coupler

Works well with my compressor

Using air tools is so much easier.

I do a lot of wood working. Using this swivel allows me to get in nooks and corners with my brad nailer that i could not get to. Adapter is well built and does not leak like my older one.

Perfect swivel coupler, keep your hoses organized

I have always had curling air compressor hose issues with my pancake compressor . This Craftsman universal swivel coupler will help you too. The 1/4" standard thread replaced my straight coupler but gives swivel and angles I would have never imagined.

Swivel coupler is a game changer!

I don't know how I've gone this long without one of these. Having to manhandle the air hose while painting is no more! Limitless rotation and a 30 degree angle range make any job much easier now as a lot less effort is required to get just the right angle of your tool to the project. 1/4" F pipe thread attaches to most air compressor hoses,and the quick disconnect mates to your air tool through a standard 1/4" fitting. Not just a nice to have,this is a must have addition if you do anything with ...

Huge addition to my setup

I have been looking for something like this for awhile. The adapter on the end of my compressor is straight out form the tank and this has caused my air hoses to fail over the years because of the stress of the rigid connection into the tank. Using this has given me the flexibility to leave my compressor where it is and not worry about the stress I put on the end when moving around my garage.

Craftsman swivel 1/4” universal coupler

This Brass 1/4” swivel coupler is a great add on as an adapter to your air compressor hose. The adapter swivels 360 degrees resulting on less stress on my air compressor hose when working with it. It snaps on easily and works well. Keep in mind this is a female connector when purchasing it.

Nice addition to my compressor

This Craftsman universal swivel coupler is the best thing since sliced bread for my needs. My compressor sits on the floor of my tool room and the hose always gets tangled. Now with this coupler I can remove the hose easily, store it neatly and use it easily whenever needed. The coupler has a standard female 1/4-inch National Pipe Taper (NPT) thread air fitting. The ball swivel side does not seem to leak even after I tried to make it leak by pushing on it all different ways, never leaked. Very...

Less stress

I like air fitting such as this one because it puts less stress on your hand and arm, you don't have to lift or angle the air hose so much. Easy to install and the angled 360 degree movement is nice. It's a quality swivel quick connect. It also has the push feature to connect the male fitting to it, push and it clicks shut, instead of holding the fitting open to insert the male fitting. I would recommend this product if you are looking for an angle swivel quick connect fitting.

It's like having a swivel lego for air operations

It's well made. Swivel action is smoother and the slide on the receiver is great. Very smoother and solid locking. It'll fit a variety of options for use. I make a lot of weird projects so having a piece like this is super helpful.

Handy little...

...connector. This is a brass 1/4 inch swivel connector. It is a very high quality Craftsman tool. Very handy when you need your air hose to tool connection to have a little more flexibility. It is a excellent addition to anyone's air tool collection. I did notice on the packaging that there was no mention of Craftsman's lifetime guarantee. Overall, it is a excellent item.