Bosch Driven 2 -Piece 1/4-in x 2-in Phillips Impact Driver Bit

Phillips head screwdriver bits #3

Size #3 Phillips head screwdriver bits are made by a well known, trusted company, BOSCH. They appear to be of top quality. We’re the perfect size for working on the tailgate of my golf cart. The blunt nose helps secure the bit in the screw head. Precision fit means the bit doesn’t slip or strip the screw-head. Made tough for use with an impact driver or power screwdriver. Easy to control because of the length (2 3/16”). Standard hexagon end with a narrow neck that allows the bit to lock into the...

Works well

This came through at a good time, I'm working on repairing my deck and some of the screws are #3 phillips. While you can use a #2 bit on them, you don't get near the torque as you do with a #3. These bits appear to be durable and well built; they grab the screw well, as you can see in the picture. I even tried a worn out concrete screw where the head was already chewed up and the bit had no issue grabbing ahold of it. The driver bit is made for impact drills, so it works nicely with the quick...

Great Quality Driver Bit

The Bosch power bits have always had a good reputation for their strength and long life. The newer”50X Life” bits are even better. They have a very precise fit into the screw head which is utmost important when driving large screws using a hammer drill. After using this bit several times, there was no slippage at all! I found the 55mm length is about the perfect length for keeping the drill far enough away from the work surface yet allowing you to have full control.

Solidly lock into the screw heads.

As of late, I’ve not had a lot of need for these #3 Philips bits, BUT, when you need them nothing else will do. I just installed a metal security door (and forgot to take a photo) but these bits lock into the screw head solid. And the bit shows no wear at all.

This doesn't fit any screw I own.

I am returning this product tomorrow. There is no point to owning this.

My go to bit

These Phillips bits are the perfect length for every day use. They lock into my impact securely and haven’t had any issues with slipping or stripping.

as described

as described and worked as it is suppose to; nothing bad to report

Buy. More

I used these on some really tuff wood and they didn’t slip at all!