A failed driver side window on a 03-08 Honda Pilot usually traces back to the regulator or its motor, and this assembly replaces both at once. Steel arms and a tested cable drive lift the glass evenly, hold it in position and cut the grinding noise that comes from stripped gears. The motor is pre-installed, so the unit bolts to the factory mounting points and plugs into the stock harness without extra brackets or wiring work. At 2.8 lb the assembly is easy to handle inside the door cavity, and it cross-references part number 748-129 so fitment can be confirmed before the door panel comes off.
Steel Regulator Arms: A steel frame and a tested cable drive raise the glass evenly, and keep it seated in the channel without tilting or binding
Motor Included and Wired: The window motor comes pre-installed and plugs into the factory harness, so no splicing or motor transfer is required
Pilot Front Left Fitment: Bolts to the original mounting points on 03-08 Honda Pilot driver doors, and matches factory glass travel and connector
Silence a Grinding Window: Replaces a regulator that clicks, grinds or lets the glass drop into the door on a daily driven family SUV
Light 2.8-lb Serviceable Design: The 2.8 lb assembly is easy to maneuver inside the door cavity, and cross-references part number 748-129 for ordering
Specification: Material: steel; Configuration: With Motor; Dorman: 748-129; Net Weight: 2.8lb / 1.27kg
