The BK882 2-in-1 Soldering and Hot Air Rework Station combines a 90W soldering iron station and a 560W hot air gun into one compact unit, giving you the power of two tools without the extra bench space. The soldering iron adjusts from 356 to 896 degrees F, while the hot air gun covers 212 to 932 degrees F, making this station capable of handling everything from basic through-hole soldering to SMD component rework. A large LCD display shows real-time temperature readings for both channels, and three preset memory slots let you save your most-used temperatures for fast, repeatable results. The dual-switch design lets you run each tool independently, so you can power down the iron while the hot air gun is in use and vice versa. Auto-sleep mode drops the iron to a lower standby temperature during idle periods, reducing tip wear and extending the life of your consumables. Digital temperature calibration keeps readings accurate over time, and the unit supports both Fahrenheit and Celsius display modes. The kit ships with five interchangeable soldering iron tips, one hot air nozzle, a solder sucker, ESD-safe tweezers, soldering wire, a brass tip cleaner, and an instruction manual, covering the essential accessories for circuit board repair, mobile phone service, home appliance work, and hobby electronics projects.
2-in-1 design combines a 90W soldering iron station (356-896 degrees F) and a 560W hot air rework gun (212-932 degrees F) in one compact unit with independent dual-switch control
Three preset temperature memory channels let you store and recall your most-used settings with a single button press for faster, repeatable work
Auto-sleep mode reduces iron tip temperature during idle periods to minimize tip wear and extend consumable life
Large LCD display shows real-time temperature for both stations with digital calibration and switchable Fahrenheit or Celsius readout
Kit includes 5 soldering iron tips, 1 hot air nozzle, solder sucker, ESD-safe tweezers, soldering wire, brass tip cleaner, and instruction manual
