BILT HARD 10000 LB 2 Post Car Lift Clear Floor

Capacity and Application: The Car lift is a 10,000 lb (4500 kg) 2-post car lift designed for lifting small to medium-sized vehicles in garages and workshops, reaching a maximum lifting height of 1820 mm (around 71 in)

Hydraulic Lifting System: The lift utilizes a hydraulic cylinder in each column, powered by a 220V 60HZ 1PH unit with a working pressure of 16MPa, driving carriage movement via a leaf chain mechanism

Performance and Dimensions: It features a rising time of less or equal to 55s and a descending time between 20s and 40s, the lift has a net weight of 640 kg (1411 lb), a passing width of 2618 mm (around 103 in), a total machine width of 3496 mm (around 137 in), and a machine height of 3720 mm (around 146 in), operating with a noise level of less or equal to 75dB (A)

Adjustable and Balanced Operation: Its load supporting mechanism features adjustable arms and lifting pads to accommodate various vehicle chassis types, wire rope system ensures synchronized movement and maintains balance between the two carriages during lifting and lowering

Dual Manual Safety System: The lift incorporates a double safety locking mechanism with manual release, safety locking plates engage a toothed bar on the columns to secure the carriage at desired heights, and a swing arm positioning mechanism automatically locks to prevent vehicle slippage during operation, effective when the carriage front end is between 450mm and 1900mm high