The ARCCAPTAIN CUT55 Pro is a 120V 240V dual-voltage 55A plasma cutter featuring an MCU digital upgrade and smart App control up to 10 meters away. Its non-touch high-frequency pilot arc delivers a 12mm 1 2 inch quality cut and a 20mm 3 4 inch maximum cutting thickness through rust and dirt. It offers 2T 4T modes, intelligent post-blow times 5s 8s 10s, and a pre-installed air regulator for a 1-minute setup. ANSI certified, it features an advanced cooling system that cuts noise by 50 percent, doubles cooling efficiency, and provides full overload protection.
CUTTING THICKNESS UP TO 20MM:MCU upgrade digital control for stable current and voltage Quality cut 12mm 1 2 inch maximum cut 20mm 3 4 inch.
PILOT ARC FUNCTION:High frequency non touch arc start cuts through dirt rust coatings without workpiece contact to extend torch life.
APP CONTROL:App control handles parameter adjustments real time monitoring and status detection up to 10 meters away.
2T 4T AND INTELLIGENT POST BLOW:2T for flexible cutting 4T for long cuts Current 20 to 34A post blow 5s Current 35 to 45A post blow 8s Current 46 to 55A post blow 10s.
ONE MIN START CUTTING:Pre installed air regulator and filter installs in 1 minute Filters water oil impurities for stable air pressure.
SAFETY AND DURABILITY:Smart fan cuts noise by 50 percent doubles cooling efficiency extends life by 50 percent Lowers failure risk by 70 percent Overcurrent overvoltage overload overheating protection ANSI certified.
