Professional installation recommended
AQM 6 tankless electric water heaters are designed to provide warm water around 100° F / 38° C for hand washing at 1 high-flow sink
AQM 6 models require 240 volt electric service, 1 dedicated 30 amp breaker, 10 gauge copper wiring, and have 3/8" plumbing connections
AQM series tankless water heaters were meticulously engineered in Germany and are manufactured in the US with great care and with the best available materials to provide years of trouble-free service
The Nichrome (nickel-chromium) bare-wire heating element in all AQM Series models is controlled by a flow switch to prevent dry-firing and failure, and is additionally equipped with a safety high-limit with manual reset
AQM tankless point-of-use water heaters are 99% efficient, heating water instantaneously and endlessly and, unlike tank water heaters, have no stand-by energy losses
The temperature of the water delivered by an AQM tankless point-of-use water heater depends on the incoming cold water temperature, the water flow through the unit, and the size of the AQM model that is installed
AQM tankless point-of-use models excel at supplying water at a constant temperature but must be carefully matched to the flow rate of the sink being plumbed to operate properly
