Before ordering, review the listing from start to finish and compare the intended project with the product category, installation approach, and site requirements shown there. Confirm that the selection suits the planned work, then inspect the package information so you understand what is supplied and what must be arranged separately. Read the setup directions carefully, prepare the work area, and follow the recommended care guidance after installation. Use the specification table to resolve remaining questions about fit, handling, placement, and project planning for SKU LABXR6I8, and consult a qualified professional when the job conditions call for additional advice.
For wood post railing projects, this kit is intended for decks, stairs, balconies, and porches, helping installers plan a cable-supported arrangement for the listed outdoor or elevated locations while considering the post layout and site conditions that suit the project identified by SKU LABXR6I8
Made for 1/8 inch stainless steel cable, the hardware can be arranged for straight railing runs or angled stair sections, so the installer can choose a layout that follows a level span or changes direction where the planned railing requires it during assembly, with SKU LABXR6I8
The package provides 10 tensioners, 10 end fittings, and 40 wood screws sized 1 1/2 inch #8, giving the stated hardware quantities for a wood post cable railing installation when the posts, cable, and project layout are separately ready and suitable, under SKU LABXR6I8
Fittings and wood screws use 316L stainless steel, pairing a clean silver appearance with the stated outdoor performance for railing projects exposed to exterior conditions while preserving the material choice identified for this hardware during exterior use and under SKU LABXR6I8
The flat surface mount base is designed to sit neatly against wood posts for a clean, low-profile placement, and pre-drilling pilot holes is recommended before screw tightening to help guide positioning and support the described installation process at each post, as noted for SKU LABXR6I8
Because this swage-style hardware needs a standard cable railing crimping tool, plan for that tool before crimping the 1/8 inch cable end so the fittings can be completed with the required secure hold on a compatible cable railing system, according to SKU LABXR6I8