The Anqtovp UT210E mini handheld clamp meter combines current measurement with voltage, resistance, capacitance, diode and continuity testing in one multi tester. It measures both AC and DC current, with a minimum resolution of 1mA and a maximum range of 100A. For small-current testing, the meter provides a resolution of 0.001A, helping distinguish low current readings during electrical troubleshooting and HVAC work. AC voltage and AC current measurements use true RMS values. Voltage, capacitance and resistance measurements use auto-ranging, so the meter selects the measurement range for the value being checked. The UT210E also includes a diode function with a 3.2V open-circuit voltage. This supports measurement of LEDs with a large voltage drop, in addition to standard diode checks. Continuity testing is included for checking electrical circuit paths. Non-contact voltage detection is provided through the sensor located at the top of the jaw head. This allows voltage detection without using the jaw head for a direct current measurement. The meter has product dimensions of 7.4 x 2.83 x 2.2 inches and a product weight of 8.47 ounces. For an expanded AC current measurement range, the optional I600E current clamp can measure AC current up to 600A. The I600E is an optional accessory and is not described as part of the UT210E product measurements. The package dimensions are 10.3 x 5.4 x 2.2 inches and the package weight is 0.84 pounds, which are separate from the meter dimensions and product weight. With its handheld clamp format, 6000-count meter description, true RMS AC measurement, auto-ranging functions and electrical test modes, the UT210E is designed for a range of circuit measurement tasks where current, voltage, resistance, capacitance, diode or continuity information is required.
Measures AC and DC current from a minimum resolution of 1mA up to a maximum range of 100A for electrical testing and troubleshooting tasks
Measures tiny currents with a resolution of 0.001A while AC voltage and AC current measurements use true RMS values for the UT210E meter
Provides auto-ranging for voltage capacitance and resistance measurements and includes a diode mode with 3.2V open-circuit voltage
Measures LEDs with a large voltage drop through the diode function and supports continuity testing for electrical circuit checks
Uses a sensor at the top of the jaw head for non-contact voltage detection with product dimensions of 7.4 x 2.83 x 2.2 inches
Supports the optional I600E current clamp for AC current measurement up to 600A when an extended current measurement range is needed
