The Afoxsos cable railing hardware kit is designed for a 1/8 inch cable railing system installed with wood posts. It includes adjustable angle swage turnbuckle tensioners for cable railing layouts that require angle adjustment, including various angles on staircase cable railings and horizontal cable railings. The installation angle can be freely adjusted to suit the railing layout. Each turnbuckle tensioner has an adjustable telescoping length from 7 1/5 inches to 10 inches. The installable span is approximately 30 feet. When the railing includes a corner or an angle change, another turnbuckle tensioner will need to be reinstalled to ensure structural safety. Review the railing layout before installation so the tensioner placement matches the cable path and any changes in direction. The hardware is made of T316 stainless steel and is described as rust free, corrosion resistant and durable for indoor and outdoor use. The kit is intended for a 1/8 inch cable railing system of wood post. A crimper is required for installation to crimp the cable, so prepare that tool separately before beginning the installation. The package includes 10 adjustable angle swage turnbuckle tensioners, 10 end fittings, 42 screws and 1 small wrench. These quantities provide the listed hardware combination for the cable railing system. Check the included components against the project requirements and cable railing layout before installation. The product dimensions are 9.17 x 4.72 x 1.89 inches, and the product weight is 2.98 pounds. The package dimensions are 9.2 x 9.1 x 2.4 inches, with a package weight of 8.58 pounds. Product measurements and package measurements are listed separately for reference when planning storage, transport or installation preparation. This kit provides adjustable tensioner hardware, end fittings, screws and a small wrench for the specified 1/8 inch cable railing system with wood posts.
Each adjustable angle swage turnbuckle tensioner telescopes from 7 1/5 inches to 10 inches and supports an approximately 30 foot installable span
The turnbuckle tensioners allow the installation angle to be freely adjusted for various angles on staircase cable railings and horizontal cable railings
Made of T316 stainless steel the hardware is rust free corrosion resistant and durable for use with indoor and outdoor cable railing installations
Designed for a 1/8 inch cable railing system with wood posts this kit requires a crimper to crimp the cable during installation
The kit includes 10 adjustable angle swage turnbuckle tensioners 10 end fittings 42 screws and 1 small wrench for the listed cable railing system
Product dimensions are 9.17 x 4.72 x 1.89 inches and product weight is 2.98 pounds while package dimensions are 9.2 x 9.1 x 2.4 inches