The Adrinfly Fuel Injector Tester and Universal Cleaner Tool Kit provides a tool for checking injector operation with the engine switched off. It includes 6 cleaning adapter sizes for 12V and below injectors, supporting applications such as MPFI, SPFI, TBI, CFI, L-JET, LPG, motorcycle fuel injectors, K-Jetronic, FSI and coil-over direct injectors. The adapter selection helps accommodate a range of injector connections during testing and cleaning work. The tester offers 8 pulse modes through 4 pulse signal patterns and 2 output voltage levels. Select short, medium, long or continuous pulse modes, then use the high or low drive setting at 12V or 5V. An LCD display and 2 voltage indicator lamps provide operating information, with the lamps flashing rapidly to indicate continuous pulse output during operation. The 4-wire dual channel includes 2 output terminals, allowing 2 injectors to be tested simultaneously. For connection protection, the unit provides power input reverse polarity protection and output short circuit protection. If an injector is damaged or the pulse output is short-circuited, the output status indicator becomes dim. The tester can also be used for testing relays or solenoid valves, but those applications should be performed under professional guidance. Power the unit continuously from a 12V vehicle power source or from an external DC 12V power adapter, with 1.5A minimum recommended for the adapter. It is compatible with any fuel pressure tester and is intended for petrol vehicles only, not diesel engines. Cleaning requires a separate cleaner and a separate DC 12V power supply, which are not included. The test lead measures 47 cm or 18.5 in, and the power cord measures 85 cm or 33.5 in. Test leads and power cables are made of silicone for use at low or high temperatures. The listed product dimensions are 7.36 x 5.28 x 2.99 in with a product weight of 1.04 lb. Package dimensions are 7.4 x 5.3 x 3 in, and package weight is 1.04 lb.
The Adrinfly injector tester kit includes 6 cleaning adapter sizes for 12V and below injectors including MPFI SPFI TBI CFI L-JET LPG motorcycle K-Jetronic FSI and coil-over direct injectors
Eight pulse modes combine short medium long and continuous signals with high and low 12V or 5V drive levels while the LCD and indicator lamps show output activity
Power input reverse polarity protection and output short circuit protection help indicate an injector or pulse output fault when the output status lamp becomes dim
Use the tester with a 12V vehicle power source or an external DC 12V adapter with 1.5A minimum recommended for petrol vehicles only and not diesel engines
The 4-wire dual channel has 2 output terminals for testing 2 injectors at the same time with a 47 cm 18.5 in test lead and an 85 cm 33.5 in power cord
Silicone test leads and power cables support use at low or high temperatures while the listed product size is 7.36 x 5.28 x 2.99 in and product weight is 1.04 lb
