GIVIMO Cast Iron Anvil 88-lb Single Horn Blacksmith Forging Anvil 23.3-in Length 6.7-in Height 55 HRC Quench-Hardened Face with 1-in Pritchel Hole and 0.9-in Hardy Hole for Bending and Shaping

Hardened 55 HRC Face: Quench-treated forged steel face rebounds energy back into the work and resists pitting under repeated hammer strikes for sharper forging control

Wide 23.3-in Countertop: Flat working surface gives plenty of room for straightening bar stock, drawing out blade blanks and flattening sheet without overhanging the edge

Round Horn For Bends: Tapered horn shapes scrolls, rings and curved bends, while the step area supports cold cuts and shoulder forming on hot stock

Hardy And Pritchel Holes: 0.9-in x 0.9-in hardy and 1-in round pritchel hole accept bottom tools and punches for hot punching, slitting and accessory swaps

Stable 88-lb Base: 9-in x 6.4-in cast base and 88-lb mass dampen recoil and keep the anvil planted on a stand or stump during heavy hammer work

Specification: Weight: 88 lb / 40 kg; Length: 23.3-in / 592-mm; Width: 6.4-in / 162-mm; Height: 6.7-in / 170-mm; Base: 9-in x 6.4-in / 232-mm x 162-mm; Hardy Hole: 0.9-in x 0.9-in / 22-mm x 22-mm; Round Hole: 1-in / 25-mm; Hardness: 55 HRC; Material: Hard Steel