The Tekton 130-Degree Pick (1/8 Inch x 3 Inch) is a pick that is best suited for precision applications, including reaching up and over obstructions to scrape and pull. The pick features a tip that comes to a sharp 30-degree tapered point to keep the strength as close to the tip as possible. Two "wings" on the base of the blade help it resist being twisted or pulled out of the handle. The classic square handle is long and slender with contoured sides for overall versatility and maneuverability. The AISI 8650 steel shaft is made from a strong Ni-Cr-Mo alloy that's hardened to 50–54 HRC. The handle is made from glass-reinforced nylon that's resistant to fuels, oils, and chemicals. Our family of mini pry bar, pick, and hook products is made entirely in Michigan with only USA-sourced materials. Machining, bending, coining, handle molding, and press-fitting the handle and blade take place at our Grand Rapids, Michigan manufacturing facility.
Best for Precision Applications – Reach up and over obstructions to scrape or pull
130-Degree Pick Geometry – Each tip comes to a sharp 30-degree tapered point to keep the strength as close to the tip as possible
Resists Twisting Out – Two "wings" on the base of the blade help it resist being twisted or pulled out of the handle
Versatile Handle – The classic square handle is long and slender with contoured sides for overall versatility and maneuverability
Manufactured in Michigan – Our family of mini pry bar, pick, and hook products is made entirely in Michigan with only USA-sourced materials
