Garvee 14-Amp Rebar Cutters and Benders
POWERFUL 1600W COPPER COIL MOTOR, Equipped with a 1700W pure copper motor, this rebar cutter and bender runs quietly, has low noise, and improves working efficiency, reducing unnecessary wear, The copper motor extends the operating life of the machine, It operates at a voltage of 110V, frequency of 60 Hz, with amps of 14A, and a noise level of 92 dB(A).
EASY ANGLE ADJUSTMENT, Our rebar bending machine has two slide-type angle selectors, making it easy to bend any angle from 0-180 degrees, Preset angle locks ensure accurate, repeatable angle bending, During bending, the angle of point 1 must be greater than point 2 for proper operation.
LIGHTNING-FAST PERFORMANCE, Our rebar bending and cutting machine can bend rebar from 1/4'' 2 to 1" 8 Grade 60 (6 to 25 mm) within 6 to 7 seconds and cut rebar within 5-6 seconds, It can bend at any angle from 0-180 degrees with a bending radius of 1,57'' / 40 mm, and its maximum rebar hardness is HRC30, The hydraulic oil type used is VG46.