Accommodate different dent size from 0.2" to 5.3"; And the bridge dent puller can also be adjusted to repair dents from 0.2" to 3.54"
The glue sticks have a strong viscosity,The bottom of our golden dent puller and bridge puller is made of soft material, so it will not damage your car's original paint;
Material of Puller: Aluminum+ABS+Rubber; Material of Slide Hammer: Stainless Steel; Material of Glue Gun:PVC
Professional Dent Puller Kit: Our golden dent lifter allows you to adjust the width and height to accommodate different dent size from 0.2" to 5.3"; And the bridge dent puller can also be adjusted to repair dents from 0.2" to 3.54"; The stainless steel 2-in-1 slide hammer can be used as a short one or a long one with a simple replacement; Three suction cups are quite easy to use, make dents disappear from your beloved car;
Why Choose Us: Our solid tabs are more durable than most hollow tabs on the market; And 50 pcs tabs of different sizes and shapes are great for repairing various dents; The glue sticks have a strong viscosity, ensuring that the tab can stick firmly to the dent; With our hot glue gun, you can quickly melt the glue stick and start repair work;
No Damage to Original Paint: The bottom of our golden dent puller and bridge puller is made of soft material, so it will not damage your car's original paint; And our glue is easy to clear; don't worry about residual glue on your car's body;
How to Use It: 1; Clean the dent surface and apply a hot glue stick on the puller tab; 2; Put the puller tab on the dent and wait a few minutes; 3; Place the lift puller to pull up the dent; 4; After the dent is out, spray alcohol on the tab and use a scraper to clean the glue; Following the above steps, you can quickly repair car dents, door dents, hail damage, and other dents; Suitable for cars, refrigerators, washing machines, and other metal surface dents;
What You Will Get: 1 x gold dent puller, 1 x 2 in 1 slide hammer, 1 x bridge puller, 2 x small suction cups, 1 x large suction cup, 50 x puller tabs, 6 x bridge puller tabs, 2 x groove of puller lines, 4 x puller lines, 1 x hot glue gun, 20 x hot melt glue stick, 1 x air wedge pump,1 x plastic shovel, 8 x tap down pens, 1 x rubber hammer, 1 x empty bottle, 1 x cloth, 1 x tool storage bag, 1 x reflect board, 1 pair of gloves;
Specification:Material of Puller: Aluminum+ABS+Rubber; Material of Slide Hammer: Stainless Steel; Material of Glue Gun: PVC; Power of Hot Glue Gun: 20W; Voltage: 100-240V 50/60Hz
