Epoxy Elite EVO Acid-resistant 2-part epoxy mortar for the installation and grouting of ceramic tiles and mosaics with 1 to 15 mm joints, on indoor and outdoor floors and walls. Product with ultra-low emission of volatile organic substances (VOC). Innovative new approach to Epoxy Mortar that enables a smoother matte finish. Commercial product that can be used as a non-sag setting material and grout product. Extremely easy to install and maintain. 2-part anti-acid epoxy mortar. Part A consists of a mixture of epoxy resin, fine-grain siliceous aggregates, pigments and specific organic additives. Component B consists of an innovative organic catalyst. The 2 parts, once mixed together, form a creamy mixture with excellent smoothness, also for no-drip vertical application. Once hardened, the product has ultra-high performance in terms of mechanical and chemical resistance. When applying grout to tile we recommend using The Tile Doctor Green Epoxy Float. This float is specially designed to spread grout into joints when grouting tile with epoxy-based grout.
Two Component acid-resistant epoxy mortar for the installation and grouting of ceramic tiles with joints of 1 to 15 mm width (3/64 in to 19/32 in)
Suitable for laying and grouting floors and walls in: bathrooms, shower cubicles, swimming pools, thermal baths, saunas, Turkish baths
When installing epoxy grout make sure to follow directions and use the proper tools listed in the instruction manual; mix the 2 parts with a small mixer on a drill at a low speed as to not heat up the grout but to mix it thoroughly
Mixture life: approximately 1 hour at T = +23°C (73.4°F) recommended application temperature: recommended between +18°C to +23°C (64.4°F to +73.4°F) walkable after: 24 hours at T= +23°C (73.4°F)
