How to Hide Wires

Use a pencil to mark the anchor points on the wall. Ensure the points are evenly spaced and aligned with the cord cover base.

Use the screws to attach the base of the cord cover to the anchors and ensure that the cord cover is firmly mounted on the wall.

Carefully arrange the cables over the cord cover's base, ensuring no bends or twists. Then, snap the cover firmly to hide the wires altogether.

​Mark the spot where you want the hole in the wall, attach a drywall hole saw bit to your power drill. Ensure the bit is the same size as the hole cover for a secure fit. Now, carefully drill the holes at the marked locations.

Insert the cords through one of the hole covers, lower the cords from the upper hole, grab them through the lower hole and pull them through the second hole cover.

Insert the hole covers into the holes and push them firmly into place.

Measure the length of cords you need to conceal. Then, measure and cut the flex tubing to match this length. Next, cut the tubing lengthwise to create two separate halves.

Separate the two halves of the flex tubing. Carefully wrap the bundled cords with half the tubing, ensuring they are completely covered.

Selecting cable protectors specifically designed to accommodate the size and type of cables you need to cover. Consider using modular protectors, which are often versatile and can be easily adjusted to fit different cable configurations.

Make sure to carefully place the cable protectors over the cables in a corner of the room, ensuring they are securely in place and provide adequate protection.