IDEAL IDEAL 10-Pack Cat6 Rj45 Idc Connector with 25-Pack Cat6 Rj45 Modular Plug

This set includes the IDEAL 10-Pack Cat6 Rj45 Idc Connector (89-761WH) and 25-Pack Cat6 Rj45 Modular Plug (85-375). IDEAL keystone jacks are high performance modular jack connectors designed to exceed the CAT6 requirements of ANSI/TIA-568-C.2 Giving installers the ability to use these products in residential and commercial installations for applications such as Gigabit Ethernet. All jacks feature a robust internal printed circuit board design used to help reduce NEXT (near-end cross talk) and improve RF performance at higher frequencies. The IDC tower design and layout help to simplify and speed up the wiring and termination process. Tapered tower tops help to separate each pair into the individual IDC slot without the need to untwist each pair. This allows pairs to easily maintain the recommended maximum of 1/2 inch of untwisting per pair from the cable jacket. Twisted pairs stay together. With the PCB design, each color pair is terminated side by side, in a consistent pattern. Less time spent untwisting, separating and routing individual conductors to the IDC contacts. CAT6 Feed-Thru connectors are single piece connectors that use the same assembly process, no special assembly or multiple pieces for CAT6. Open-end Feed-Thru connectors offer several advantages over standard closed end connectors. Conductor order can be verified prior to crimping. Conductors that Feed-Thru the connector are inserted far enough to be pierced by the pin below. The cable can be pushed or pulled into the connector to ensure that the twisted pairs are as close to the pin contacts as possible and that the jacket is seated beyond the primary strain relief for a secure connection. A patent pending design enables conductors to be cut flush with the end face of the connector when used with the FT-45™ tool.