GREAT STUFF PRO GREAT STUFF CONSTRUCTION ADHESIVE

100% recommended 0% chance of finding in stock

I get it's hard to sell a $5 tube of subfloor glue when 1 can equals 16 tubes so that's a big problem of your own creation. So just drop the tubes down to $2, I mean how many ppl even walk to the insulation looking for construction adhesive 🤷‍♂️ You stock all the other greatsuff products👌🏽

not enough propellant, not cold weather usable

i am a contractor and own 4 pro guns. the adhesive usually guns gpod the first day, but when you try to use the rest of the can the next day, it doesnt wNt to come oyt and lacks propellant, even after closing the screw on the back of the pri gun or for that matter discon ecting the can.

Incredible lasting, durable and filling crevices

First step, make sure you have a Great Stuff Pro Dispensing Gun to get the most out of this product and to have the best control of your spray from small to large sprays of foam. Allow up to 24 hours to cure. Keep in mind this stuff is design to last, so definitely highly recommend getting a pair of disposable gloves and safety goggles. Overall, the product work perfect to fill in all the areas around the house such as under the sink near the drainage. I was surprise in how much I got out of t...

Super strong and goes a long way

I bought this to glue some phenolic resin/melamine boards I am using for wall protection in my garage. This glue worked very well. I can’t pull it off at all. Originally I planned to buy Advantech subfloor adhesive which I used when I built the house and which is fantastic but I couldn’t find it locally so I bought this instead. Very happy with the results. One fan lasts a very long time. Fortunately I already had the gun and cleaner.

Will use this foam again

I’ve used other Great Stuff products and while they seem to work well, and do the job, control and messiness is an issue. While it’s a bit more expensive to buy a gun and cleaner for this stuff, I can now see why and it’s totally worth it. I used it in assembling some steps for our deck and an enclosure for our trash cans, as a couple roving dogs seem to frequent our driveway in the middle of the night. The bead control and constant flow are terrific. Also being able to come back a couple weeks...

Wanted to try it

I usually use the single use cans, but I always seem to waste some of it since I never can use it all of it at once. So I wanted to try this so I would have less waste. Little did I know when I ordered it, I needed a gun for it. But now that I have the gun I can keep using these types of cans. I thought that i would have no waste from this, but when I screwed the can on a little came out of the top. Ok just a little waste. It was easy to dispense with the gun and easy to control how much came ...

Works great for many things

Knowing how well this stuff works on gluing drywall and flooring I decided to try something different with what I had left in my can. One thing to remember though is that this can takes a special applicator that is sold separately from the can of glue, not like the cans of spray foam that you can buy. I had a small project of gluing treated wood to a concrete block pedestal that I had made a few years ago and the previous glue I used wouldn't hold. I had split round posts so that I could glue t...

Fast way to complete larger applications

I have used this product before - but in smaller 'straw applicator' cans - which generally require you to go through a bunch of cans for larger projects (when you can get them to reliably work). This package format does require the separate purchase of an applicator gun which has a handle similar to a garden hose. The can screws into the gun and from there you can precisely aim and apply a stream of adhesive. My project is not quite ready for actual product use but I fully intend to use this ...

Great for Large Projects

The glue is very easy to apply compared to a standard caulk gun so for large projects this is defiantly a plus. For small projects though I would not recommend as you will have to clean your applicator gun each time you finish using it. I glued two 2x4’s together to see what it would take to split it and once dried it took a breaker bar and hammer to split them. I was hoping to see the glue work so effectively that the boards would rip apart in splinters around the glue but there was very little...

Adhesive Not Insulation!

GREAT STUFF PRO Wall and Floor Adhesive 26.5-oz I received this product free in return for an unbiased review. First, I had high hopes for this product having a specific use in mind for it. I recently decided to update the access door into my attic. It was essentially drywall with a piece of pink attic insulation on it held in place with plastic netting. The insulation was thin at the ends and about 6 inches thick in the middle and allowed the temperature in the area to vary widely during pe...