Crescent NailSlicer Framing 7-1/4-in 24T and Finishing Carbide 7-1/4-in 40T Circular Saw Blade Contractor Bundle

blade

best quality and reliabilities blade on market, very easy to install

Circular saw blades

Very Nice framing circular saw blade

If you need a smaller size blade Consider this.

So what's special about this saw blade? It calls itself the "Nail Slicer" I used it to cut some lumber and it did well. Like a good quality blade. Did I go looking for a nail to cut into? No. I can write a review on this blade and my short time experience, but I will use it and try to avoid cutting nails. I can not say how it will hold up after hitting a nail. Or a bunch of nails. I would use a Crescent Tools " Metal Cutter" blade if I knew I had to be cutting lumber with some nails to cut thru...

Nail Slicer lives up to its name!

Crescent Nail Slicer 24T framing circular saw blade easily lives up to its name. I'm happy to see Crescent branching out. They have been a staple name in the construction industry forever. I feel that their attention to quality and detail should give some amount of confidence to buyers. From experience, I can say that this blade is more than worth a whirl, and deserves to bear the brand name of your favorite wrenches. I was shocked at how easily it cut through 2.5" galvanized nails. I cut thr...

Buy a couple of them at this price.

Sharp blade smooth cutting.

Great demo blade, tough on nails, soft on screws.

[This review was collected as part of a promotion.] I got a chance to use this blade on a couple of different jobs. The fact that it made it through both was the first good sign. Job one was a bathroom frame-up in a basement. There was some light demo work to start so I decided to use my worm drive with this blade to run it through it's paces. I hit a couple nails during the demo and gave the blade a quick glance after I saw the sparks. I never saw any chips or nicks so I just kept rolling. I u...

Very Durable Framing Blade

As this is advertised as a "Nail Slicer" circular saw blade I tested it by cutting through (24) 16d common nails and checked the cutting finish before and after as well as any damage on the carbide teeth. Prior to cutting through nails I used the new blade to cut through SYP 2x4, both at max load speed and also slowly for a smooth finish cut. Attached is a photo of the two cuts. At full load speed, the cut quality was adequate and rough as expected. With a slow feed rate, the cut finish was ver...

We call it Bladezilla!

I do like this heavy duty saw blade that goes through nails like a butter knife through room temperature butter. The second good feature besides being super sharp; is the heavy duty blade. Its thicker than most in this class. Its heavy and feels strong and rugged in your hands. To me lighter blades are just that- flimsy and sometimes floppy. Lighter ones chip easy, are brittle from being over hard, and dull easily. I have used this blade for 2 projects on my off grid project. I use Green...

Works great!

I’m having a house built and it’s 9 months past it’s projected completion date so I don’t want to add anything for the contractors to cause any more delays. That’s why I’m doing a couple of small projects myself. One of them is building a small, insulated, box to put my filtration system for my well water in. The other is reinstalling the toilets with shims. The subcontractor didn’t shim the toilets and with an above floor closet flange it just smashed the wax ring so hard that it was useless. ...

Good blade, right size and tough.

What was the reason for accepting to sample this product? Did the product help solve a problem, fill a need, or fulfill a want? How did your personal experience go with the product? Expectation vs reality Mentionable features such as durability, can travel well, made with quality material? I requested this product for use with my battery powered skill saw. My saw takes a somewhat odd sized blade and this fit my saw perfectly. It was clearly marked for rotation, which helps when in a hurry to...