Brainerd Wrapped Bar Adjust Matte Black 3 Piece Cabinet Hardware Collection

Terrible fit.

I would not recommend the purchase of this item. It t does not sit flush against the cabinet face at all. Because of the pin that locks the bar in place, there will be a gap between the mount and the door/drawer face. These are some of the more expensive handles also. I am past the 90-day return time, so I am stuck with the handles now. Oh well, live and learn. Now, I will purchase one first and test the fit. Good Luck

Great adjustable drawer pulls!

I’ve been looking for an odd sized width for handles for years. I have a very old dresser I refurbished that needed some. These were perfect! They have a good range for sizing and were easy to install. There is a particular way to install them, but the instructions are clear. The handles are very sturdy and look beautiful! I highly recommend!

Nice handles for the true DIY'er

There are very nice heavy handles - we bought 2 for some sliding doors. The problem is these use a small pin t lock the rod into the two mounts. The pin is way too big for the holes in the rod. First DIY step - drill out the holes in the rod to 3mm to clear the locking pins. Next, one of the mounts was not threaded for the through-door screws. Second DIY step - tap the mount for the 8-32 screw. Again, these are nice handles but you may be in for more DIY than you bargained for.

Not flush

Due to the locking mechanism these do not sit flush on the wood. If your wood is soft or if the angle means you can't see it then these might be fine, but the pin used to lock the handle in place means that the handle always has a gap. I wasted hours trying to get this to look good with zero luck.

Adjustable drawer pull

I needed a drawer pull with a wider hole plate and this wored wonderfully because i was able to adjust it.

Bar Door Handle

I am making a mailbox that looks like a barn and thought this would be a great handle accent. It is a little difficult to install but looks great.

Parts don't fit

This handle comes with a pair of pins that lock the handle shaft to the two mounts. Unfortunately the pins were .114" diameter and the locking holes they are supposed to fit in were .096" diameter. You have to drill out the locking pin holes in order for them to fit. Sloppy manufacturing/quality. Other than that, they look pretty good.

Nice design

Perfect addition to new kitchen cabinets. Design was nice even if assembly was a little more than expected. Seem very durable. Hopefully the hold up well

Screws not long enough

The handle is nice enough and the adjustable design is clever. Unfortunately the screws are too short so I need to buy additional screws to make it work. The package does not identify the screw thread and customer service has not been responsive.

Adjusting cabinet pull

Just as described and looks perfect! Install was super easy.