Ratings & Reviews for Project Source Dual-Blade Veneer Edge Trimmer for Clean and Precise Trimming, Interchangeable Blades, Bi-Directional Cutting

This item did not work for me

I had to bring this back because no matter what I tried I could not get it to work at all. The metal piece ended up getting misaligned and crooked. I don't know if it was not sharp enough or if it was user error but it definitely did not work for me.

use as last resort only

I got the tool because I wasn't able to find the one that I usually have and it is a complete disaster. The blades are super dull, they actually get clogged often and because of the design it has, it takes chunks of the piece of wood not only of the veneer. I had to quite often stop to clean the too

Doesn't trim well at all!

Much safer, easier & faster than using exacto

It works as advertised. My only criticism is I do wish the included cutting blades had been a little sharper. But this tool is much safer, easier and faster than trying to use an exacto type knife to trim veneer edging.

Very helpful, but not "set and forget"

This tool for its price is great, makes it easier to onramp into cleaning edge banding. I think though that I was a little too optimistic and didn't realize I'd still need to be very careful with it, that it's still capable of slicing beyond just the overhang and into the plywood itself or the banding that's non-overhang. There's also things like how humid the day is making the banding easier or less easy to trim and this tool ripping/tearing rather than cutting. Overall I'm happy it's easier to...

Meh

Did what it was supposed to. Sand paper works as well and less costly

Dull Blade

The blade was quite dull

Easy to use, presents a clean edge.

Good enough.

Not as smooth as a utility knife, but creates a nice straight cut. Takes a little getting used to which can be expensive if you are using nice veneer.

pay extra for a tool that actually works

would not recommend this tool. Because of its design wood shavings get wedged behind the blades and this causes the blade to get pushed out which puts cuts into the plywood.

Junk, sharp razor is better

the angled blades make an absolute mess of the edge. with them retracted all the way, the edge isn't trimmed neatly. Very difficult to adjust all blades identically. Passable concept poorly executed.

Veneer Edge Blade

The blade is easy to replace and it’s easy to use- I’ve used one with springs and the ease of use on this is significantly better

Worked as expected

I've installed melamine a few times and because they were straight edges I did not use a trim tool. This time I needed to attach the melamine edging to large curved edges approx. 20ft. I decided to try an edge trimmer this time because of the long curved edges. I went looking at various types of trimmers and read the reviews. I decided to go with this 90 degree Bi-Directional Cutting trimmer because this type had the better reviews. Although this trimmer received a lot of negative reviews, it m...

Trim

Worked great trim

Dual-blade veneer edge trimmer

The blades and especially the blade holder didn’t stay flat and caused a lot of extra work to get a “clean” cut. Believe a better, stiffer holder would make it retain a proper cut.

Good device!

Good edge band cutter