
Ratings & Reviews for Power Pro 1/4-in x 1-1/2-in Bronze Ceramic Round -Head Exterior Lag screws
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise these lag screws for exceptional holding power and durability in heavy-duty wood applications. The Torx drive design and aggressive threads enable secure, strip-resistant installation in dense lumber. Reviewers consistently report they hold heavy loads without loosening, with many citing successful use securing 4x4s, deck posts, and structures withstanding 86 mph winds. The Torx bit prevents cam-out when used correctly, with users noting smooth installation using impact drivers and appropriate bits like T25 or T30. Most find them reliable and long-lasting, though a few experienced stripped heads from using standard drills or incorrect technique rather than product defects.
Customer review summary generated by AI, including incentivized reviews.Worked well!
Would RecommendWorked well.
From 5_SLASH_16-in x 6-in Bronze Ceramic Round -Head Exterior Lag screws Verified Purchaser
Pilot hole needed.
Would RecommendThis round head lag screw has a large diameter head which is good for clamping but causes a problem. My driver extension has a non-rotating sleeve for guiding the screw and driver extension. The sleeve would not go over the large diameter head on this screw. This caused a lot of wobble and the screw was difficult to start into the wood. I would definitely drill a pilot hole the next time I use this screw. I just did the install so cannot comment on the corrosion resistance yet.
Verified Purchaser
The color worked well for my project
Would Recommendused for an art project
From 5_SLASH_16-in x 3-in Bronze Ceramic Round -Head Exterior Lag screws Verified Purchaser
NEEDED TO TIGHTEN UP A LOOSE SCREEN DOOR FRAME
From 5_SLASH_16-in x 5-in Bronze Ceramic Round -Head Exterior Lag screws Verified Purchaser
5/16 x 6" Bronze Torx Lag Bolt
Would RecommendLove the button head and torx drive
From 5_SLASH_16-in x 6-in Bronze Ceramic Round -Head Exterior Lag screws Verified Purchaser
Great wood screws
Would RecommendQuality,ease of screwing and the grab 👍
From 5_SLASH_16-in x 3-in Bronze Ceramic Round -Head Exterior Lag screws Verified Purchaser
Always find an answer
When I visit Lowe’s looking for a possible solution to a problem, rarely am I disappointed. The selection choice is excellent.
From 5_SLASH_16-in x 3-in Bronze Ceramic Round -Head Exterior Lag screws Verified Purchaser
great for safety
Would Recommendperfect for the job
From 1_SLASH_4-in x 1-1_SLASH_2-in Bronze Epoxy Round -Head Exterior Lag screws Verified Purchaser
Good screws, wish I could get them in 1.25" length
Would Recommendno pre-drilling, torx drive & large head
Verified Purchaser
It is strong
Would RecommendIt was strong and did the job I needed
From 5_SLASH_16-in x 6-in Bronze Ceramic Round -Head Exterior Lag screws Verified Purchaser
They work
From 5_SLASH_16-in x 6-in Bronze Ceramic Round -Head Exterior Lag screws Verified Purchaser
Good product.
Would RecommendWorks great. Just make sure you have a long enough drill bit to pre-drill the hole.
From 5_SLASH_16-in x 5-in Bronze Ceramic Round -Head Exterior Lag screws Verified Purchaser
Hello, We’re sorry to hear that this product was unsatisfactory and did not meet or perform to your expectations. We will continue to monitor product...