Will this take a .130 line?
6
The only thing I can find in the manual is the following. --- NOTE: USE ONLY .080 inch (2.0 mm) DIAMETER ROUND NYLON MONO FILAMENT LINE. Do not use serrated or heavier gauge line, as they will overload the motor and cause overheating. Your trimmer users .080 inch(2.0 mm) diameter, ROUND nylon line. During use, the tips of the nylon lines will become frayed and worn and the special self feeding spool will automatically feed and trim afresh length of line. DO NOT BUMP unit on ground in an attempt to feed line or for any other purposes. Cutting line will wear faster and require more feeding if the cutting or edging is done along sidewalks or other abrasive surfaces or heavier weeds are being cut. --- You may be able to use another line but you can see Black & Decker really wants you to use .080 round line.
Was this Answer Helpful ?No B & D says .080 and it suppose to be the round line
Was this Answer Helpful ?NO ,THE GH 3000 uses the 0.080 round line only per the manual and speaking to B&D
Was this Answer Helpful ?recommends 0.065 in
Was this Answer Helpful ?Instruction Manual indicates to only use .080 inch diameter ROUND line (B*D Model #SF-080 is recommended)
Was this Answer Helpful ?I doubt it...instructions say .80 and that's what I use.
Was this Answer Helpful ?